****This problem was posted on the Apple forums and Michael Lafferty was kind enough to let us repost in the interest of helping other Mac users. Thanks Michael**** Problem: We did an "erase & install" of Mac OS X 10.4 on our PowerBook G4, and then updated to 10.4.2. So there is nothing at all on this hard drive except for Tiger. Then, we installed the Palm Desktop software v4.2.1 revision B, and performed a HotSync to our Zire 72 device. We did this, because iSync requires a synchronization using HotSync Manager first. Then, we updated to iSync 2.1 and tried to "enable Palm OS syncing" within iSync... but we get the error message that says: "The HotSync software is not properly installed or it has never been opened. Try opening HotSync Manager (in the Palm folder in your Applications folder), then return to iSync and choose Devices > Enable Palm Syncing again." We have done ALL of this numerous times, and we still can't get it to work! Fix: The problem is one of permissions assigned by the Palm Desktop during installation, conflicting with the requirements of iSync. According to my configuration settings, your permissions for the folders listed below should appear as described below the pathname to that folder: For the Macintosh HD:Applicationsalm folder: Ownership & Permissions You can: Read & Write Details Owner: <shortusername> Access: Read & Write Group: admin Access: Read & Write Others: Read only For the Macintosh HD: HD:Library:Application Supportalm Desktop folder: Ownership & Permissions You can: Read & Write Details Owner: <shortusername> Access: Read & Write Group: admin Access: Read & Write Others: Read only For the Macintosh HD: HD:Library:Application Supportalm HotSync folder: Ownership & Permissions You can: Read & Write Details Owner: <shortusername> Access: Read & Write Group: admin Access: Read & Write Others: Read only You can either reset those values manually, [then restart and recheck them to be sure that they are set correctly] or use the Terminal application by typing these strings listed below this example - substituting your short user name - as shown below: sample: "sudo chown -R <shortusername>:admin /Applications/Palm" actual: "sudo chown -R michaellafferty:admin /Applications/Palm …where michaellafferty is the <shortusername>. Be sure to pay attention to the spaces in each string, and the direction of the / or \ [forward and back slash] characters. Here are the appropriate Terminal entries: # sudo chown -R <shortusername>:admin /Applications/Palm [NOTE: at this point, you'll be asked to enter your login password] # sudo chmod -R 775 /Applications/Palm # sudo chown -R <shortusername>:admin /Library/Application\ Support/Palm\ HotSync/ # sudo chmod -R 775 /Library/Application\ Support/Palm\ HotSync/ # sudo chown -R <shortusername>:admin /Library/Application\ Support/Palm\ Desktop/ # sudo chmod -R 775 /Library/Application\ Support/Palm\ Desktop/ Again, pay particular attention to the spaces and to the \ characters, as both are critical to the syntax of these commands. Remember to place your actual shortusername in the string where the <shortusername> placeholder is shown, as in the sample above. [Do not include the < and > characters.]
I'm really lame re:FIX I tried following the path to fix the permissions, but I don't see any of what I'm supposed to see. I also tried using "Terminal" I couldn't get that to work either. I was able to sync my iCal, AB. Now, when I hotsync, it goes through the motions, but nothing has "synced". It seems that everything stopped working when I updated to the latest version Desk app. in Palm folder. Any suggestions? Scott :blink:
Chris, I utilized you recommendation on the permissions and it work great! I can now Hotsync via Cradle Cable (USB) and Bluetooth. I can also iSync via Cradle Cable, but cannot Bluetooth sync to my (MacIntosh (Powerbook G4). I am using Verizon Wireless (locked) Treo 650 Mac OSX 10.4.2, iSync 2.1, Hotsync 3.2.1, Palm Bluetooth Manager 1.0, and the latest updated Apple iCal and Addressbook, which are the only 2 applications I am trying to Synchronize. Any ideas? Also, would Missing Sync help (I saw it received bad reviews on Amazon.com)? Alex
