 |
|
 |  |  |  |  |  |  |  |  |  |
|
05-18-2008, 07:00 PM
| #1 (permalink) |
 Join Date: May 2008
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
 |  Switched Broken LCD but doesn't work My 700P cracked (I think just lcd- digitizer seems fine) and I dismantled it and inserted an LCD and Digitizer from my friend's old 650. Supposedly they have the same 320*320 screen but it is not working at all. Just get a blank screen like it is not connected. When I looked for replacements online all the lcds are for both the 700p and 650. Is it possible that lcds directly from 650's don't work? Anyone have any ideas? They would be greatly appreciated as now I am literally in the dark! I was better off with a cracked screen. Thx. Last edited by dukejunkie; 05-18-2008 at 07:03 PM. |
|      |
| Sponsored Links |
|
05-18-2008, 07:56 PM
| #2 (permalink) | |
  Join Date: Jul 2005
Posts: 909
Thanks: 5
Thanked 26 Times in 25 Posts
| It is very possible the connectors can be slightly different and not making proper contact. It is also possible that reassembly may have loosened the connection. Did the old screen work, but had a crack? If you put that back in does it still work? Or open it up again to reseat the connector and test? SteveTaz Quote:
__________________ "Criticism is something you can avoid easily by saying nothing, doing nothing, and being nothing" - Aristotle | |
|
| |
|
05-18-2008, 08:59 PM
| #3 (permalink) | |
| Join Date: May 2008
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
| Quote:
| |
|
| |
 |
| Bookmarks |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 01:19 PM.